 |
|
 |
160 watt heating mats and kits |
| The UFH4U 160 watt heating mats are prefabricated, self adhesive mats with a 2.8mm heating cable attached. The heating cable has an output of 15watts/linear metre. The mat is a mesh design which allows the tile adhesive / levelling compound to bond to the existing floor. The mats are 50cm wide, have a 100% adhesive backing and are installed with the cable facing downwards. They come in a range of sizes from 0.75m2 - 10 m2. The Heating Mat Kits come with a FH4U deluxe automatic thermostat which includes the floor sensor probe. The FH4U heating mats are simple to install. They can be fitted under tiled floors by installing in the tile adhesive, or under laminate, wood and carpet floors (recommended maximum wattage 160watts/ m2 ) by first covering in 10mm of flexible levelling compound. |
|
|
|
 |
200 watt heating mats and kits |
| The UFH4U 200 watt heating mats are prefabricated, self adhesive mats with a 2.8mm heating cable attached. The heating cable has an output of 15watts/linear metre. The mat is a mesh design which allows the tile adhesive / levelling compound to bond to the existing floor. The mats are 50cm wide, have a 100% adhesive backing and are installed with the cable facing downwards. They come in a range of sizes from 0.75 m2 - 10 m2. The Heating Mat Kits come with a UFH4U deluxe automatic thermostat which includes the floor sensor probe. The FH4U heating mats are simple to install. They can be fitted under tiled floors by installing in the tile adhesive and are ideal for use in kitchens, conservatories. |
|
|
|
 |
Heating Cables and Kits |
| The UFH4U Loose Heating Cables are the exact some 2.8mm cables used in the heating mats. The heating cable has an output of 15watts/linear metre and is available in many sizes (to cover up to 22sqm) allowing you the flexibility of adjusting the amount of heat you generate per square meter to your requirements. The Heating Cable kits come with a UFH4U deluxe automatic thermostat which includes a floor sensor probe. The Heating Cable is easy to install and can be used under tiled floors (up to 200watts/ m2) by covering the entire cable with a flexible tile adhesive. The cables can also be used under wooden, laminate and carpet floor finishes (maximum recommended wattage 160watts/ m2) by first covering with 10mm of a flexible levelling compound. |
|
|
|
 |
5mm in-screed cable kits |
| The UFH4U In-Screed Heating Cables are 5mm in diameter and are specifically designed for use in the screed when finishing a concrete floor. The In-screed heating cable has an output of 20watts/linear metre and is available in many sizes (to cover up to 30sqm) and allow you the flexibility of adjusting the amount of heat you generate per square meter to your requirements. The In-Screed Heating Cable kits come with a UFH4U deluxe automatic thermostat which includes a floor sensor probe. The Heating Cable is easy to install and can be used under tiled (up to 200watts/ m2) and wooden, laminate and carpet floor finishes (maximum recommended wattage 160watts/m2) but must be encased in a minimum of 65mm of screed. |
|
|
|
 |
Controllers / Thermostats |
| The UFH4U deluxe Thermostats can be used with all of our under floor heating products. The deluxe thermostat measures room and/or floor temperature and comes complete with the floor sensor probe. The floor sensor probe must be installed to optimise the effectiveness of the thermostatic control and to enable you to set a maximum achievable floor temperature as is required with some floor finishes. The UFH4U thermostat is automatic and fully programmable for a 7-day cycle. |
|
|
|
 |
Insulation board |
| Whilst all our heating products will work without Insulation, Using Insulation Board between your subfloor and heating mat / cable increases the response time and subsequently increases the efficiency of the system. Insulation board such as Marmox is recommended for use beneath our 160 watt and 200watt heating mats and 2.8mm loose heating cable and kits. |
|
|
|
 |
Accessories |
Little bits and pieces that you may need during the installation of your UFH4U Heating System including:
1. Conduit - for floor sensor installation.
2. Heat Fix - for securing the in screed cable to the subfloor.
3. Scrim tape - for sealing the joints between insulation boards
4. Glue Guns - should you need to secure that heating cable further
5. Multi-metres - for testing the cables and mats prior and during installation.
|
|
